Exam forms of Summer-2017

 B.E  Remedial students [Semester 1 to 4]

આ સંસ્થા ખાતે અભ્યાસ કરતા વિદ્યાર્થીઓને જણાવવાનું કે તેમના GTU Remedial Exam form[Semester 1 to 4] કોલેજ ખાતે આવી ગયેલ છે. જે નીચેદર્શાવેલ તારીખ પ્રમાણે જે તે ડીપાર્ટમેન્ટ માં થી collect કરવાના રહેશે અને તેની ફી  online ભરવાની હોવાથી નીચે દર્શાવેલ સમય મર્યાદામાં ભરી દેવાની રહેશે. ફીભર્યા બાદ તેની પહોચ અને exam form જે તે ડીપાર્ટમેન્ટ માં જમા કરાવવાના રહેશે.

 

Ø process to pay online Remedial GTU Examination Fee :

ssgecpatan.blogspot.in >online payment> Click here to pay GTU Remedial Exam Fee >

 

ત્યાર બાદ State Bank Collect માં PRINCIPAL GOVERNMENT ENGINEERING COLLEGE PATAN સિલેક્ટ કર્યા બાદ GTU REMEDIAL EXAM FEES ભરવાની રહેશે.

 

ક્રમ	Branch	તારીખ	વિગત
૧.	ALL BE Semester 1 to 4 Remedial only	29-04-2017 to 03-05-2017	સંલગ્ન ડીપાર્ટમેન્ટ માં થી GTU Remedial Exam form collect કરવા
			Online Fee ભરવી. (Exam Form માં દર્શાવેલ રકમ)
			સંલગ્ન ડીપાર્ટમેન્ટ માં GTU Remedial Exam form ની સાથે online ફી ભર્યાનીપહોચ જમા કરાવવી.

Exam forms of summer -2017

 B.E Semester- 2 (Regular Student Only)

All Students of Following semester are informed to collect exam forms from respective department. Filled up forms with filled exam fee chalan will be checked by staff of respective department. Students have to submit Filled forms in respective department.                 

Sr. No.	Branch	Semester	Date	Venue and Time
1.	Mechanical	B.E Semester- 2  (Regular Student Only)	29-04-2017 & 01-05-2017	10:30 AM Seminar Hall

                                                                                     

NO exam form will be accepted after the scheduled date of accepting exam forms.

Note: Students must have to produce chalan of Examination fees paid at time of filling of the examination Form. 

NOTICE FOR 2 SEM & 4 TH SEM MECHANICAL

ALL THE STUDENTS OF 2 & 4 TH SEM MECHANICAL CLAIM THEIR POINTS IN 100 ACTIVITIES POINT ONLINE PORTAL BETWEEN 19/04/2017 TO 29/04/2017(IF YOU ARE ELIGIBLE.  AND ALSO KEEP  RELATED EVIDENCE FOR PROOF )

   

FM Tutorial

https://drive.google.com/open?id=0BxcIZgro7Dh8OU1OT3owbU4wTmsFM Tutorial for 4th sem student

FM TUTORIAL

https://drive.google.com/open?id=0BxcIZgro7Dh8OU1OT3owbU4wTms

All Students of 4 th semester are here to informed that they have to complete their manual with all six tutorials  before 30/04/ 2017 

Career Guidance Seminar_Mandatory for all students of Sem-VIII

Exam forms of summer -2017

 B.E Semester- 4 (Regular Student Only)

All Students of Following semester are informed to collect exam forms from respective department. Filled up forms with filled exam fee chalan will be checked by staff of respective department. Students have to submit Filled forms in respective department. 

Sr. No.	Branch	Semester	Date	Venue and Time
1.	Mechanical	B.E Semester- 4  (Regular Student Only)	20-04-2017  &  21-04-2017	11:00 AM Seminar Hall

                                                                                                              

NO exam form will be accepted after the scheduled date of accepting exam forms.

Note: Students must have to produce chalan of Examination fees paid at time of filling of the examination Form. 

Regarding CoE updates

All Mechanical Engineering students are hereby informed that hereafter all updates regarding CoE will be uploaded on  coegecpblog.blogspot.in. Keep visiting blog regularly so you do not miss any updates regarding CoE.

CoE Coordinator
Prof. Swapna Pawar

Submission of Refrigeration and Air Conditioning (2161908) Semester VI

All the students of B.E. Semester VI are hereby informed to submit their term work of Refrigeration and Air Conditioning as per scheduleand venue mentioned below. all the students are informed to get  their manual signed by concerned lab faculty before submission.
Date.18/04/2017-  Division M
Date.19/04/2017- Division B
Date.19/04/2017- Division C
 Venue: Lab-413
Faculty: K.K.Pansal

Campus drive for Mechanical Students. Shriram Transport Finance Company Limited

Campus drive for Mechanical Students.    Shriram Transport Finance Company Limited                                           20th last date of registration 18 th april ( 2.00 PM)              


LINK FOR REGISTRATION


CAMPUS POOL RECRUITMENT DRIVE FOR ALL BRANCHES  of ENGINEERING and MBA final year students at Saffrony' Campus on  20th April 2017,  that is, FOR PASS-OUT BATCH OF 2017.

Company             : Shriram Transport Finance Company Limited
Position               : Management Trainee
Qualification     : B.E./B.TECH./MBA/PGDM - Any Specialization (Only male candidates)

ELIGIBILITY CRITERIA
· Should complete their Qualifying Degree (Engineering or MBA) with First Division.
· Age not above 25 years (i.e., born on or after 01/01/1992)

COMPENSATION
 Selected Candidates will be paid CTC of Rs.2.16-2.40 lac p.a. during Training & Probation period.

 RECRUITMENT PROCESS AND SCHEDULE (20th APRIL Wednesday 2016)
Online Written Test (approx. 1 hour)  to be held in Saffrony's Computer Lab (in CE-IT Dept).
08:45 AM - Computer Lab simulation for test process
9:00 AM - Commencement of Test Process, Presentation & Preliminary Interview.  Candidates and institutions are requested to note that 2 member team will be visiting (from outside Gujarat)  and hence to please ensure their time is utilized productively.Final Interview will be through SKYPE session on 21st April and will be informed to shortlisted students on 20th evening .

Notice for VIII sem Students regarding submission

                                Notice for VIII sem Students regarding submission

All VIII sem students are hereby informed that Solve the given Numericals in Lab manual and be ready for submission from tomorrow.
Student has to submit their termwork to their respective lab incharge. Contact your lab incharge for submission timings.

https://drive.google.com/open?id=0BxcIZgro7Dh8S0hvaGZpSGdDYU0

Mid-Sem. Exam Syllabus

Mechanical Measurement and Metrology (2141901)

Mechanical Measurement: Need of mechanical measurement, Basic definitions: Hysteresis, Linearity, Resolution of measuring instruments, Threshold, Drift, Zero stability, loading effect and system response. Measurement methods, Generalized Measurement system, Static performance characteristics, Errors and their classification.

Linear measurements: Linear Measurement Instruments like Vernier calliper, Micrometer, Vernier Height Gauge, Slip gauges, Limit gauges etc.

Angular measurements: Discussion about sine bar, Angle Dekkor and Autocillimator, angle gauges and Spirit Level.

Metrology: Basics of Metrology, Need for Inspection, Accuracy and Precision, Objectives, Standards of measurements.

Refer: Question bank

CoE- Notice for VI semester students

All VI semester students  are hereby informed that student who were not qualified for the course Essential of Nx Designer should register for the course before 15-04-2017 and those who were qualified for Essential of Nx Designer, has to get register for Advance Simulation course before 15-04-2017

NOTICE FOR IV SEMESTER

MID SEM. EXAM SYLLABUS

MACHINE DESIGN & INDUSTRIAL DRAFTING 

(2141907)

Topics: 

• Concepts of stresses and Strain, Combinations of Axial, Shear, Torsional and Bending loads; Theories of Failures: Distortion energy (von Mises), Maximum-Shear stress, Maximum Principal stress, Coulomb-Mohr Theory, Selection and Use of theories of failures; Factor of safety, Contact stresses, Crushing and Bearing stress
• Design of Cotter and Knuckle Joints.
• Design of solid and hollow circular shaft subjected to torque and combined loading; Design of shaft for rigidity and stiffness; Design of Keys: Saddle, Sunk, Woodruff, Square, Flat, Kennedy key and Splines. Design of Couplings: Concept of rigid and flexible couplings, Design of: Clamp, Rigid flange and Flexible couplings

NOTICE FOR   8 SEM MECHANICAL

DATE:07/04/2017

                 All the  students of 8 sem mechanical are complete their PROJECT-II and submit to their respective guide on or before 10/04/2017.

All the  students of 8 sem mechanical are complete the GTU PMMS Procedure online.and upload PPR as per guideline of PMMS PORTAL GTU time to time.if you not getting completion certificate from GTU PMMS PORTAL intime,then you are not able to seat in viva exam of PROJECT-II. So take it sincerely.

if any query regarding GTU PMMS PORATAL Tthen contact to  Prof. Amit sir at GTU. Mo.No.  is 9898801467

FROM: HOD (MECHANICAL DEPARTMENT)

Notice (DE-2B)

 All the  students of 6th sem  Mechanical Department here by inform you to complete the term work of DE-2B with given guide line  which is listed  below link:DE-2B (6th Sem) and submission on 20 April 2017.

Submissions by the end of 6th semester shall be:

Following point should cover in your report: 

1. Process Report comprising:

a. Introduction (Describe your project in detail including domain – type, place, why and how team selected this domain and why this domain is important in relation to Design Thinking/Human-Centered process etc.)

b. Canvases and framework from 5th semester based on different phase of Design Thinking

c. Feedback analysis with the user and Summary on validation process and refinement in the rough prototype shall be clearly included in the report

d. Detail design calculations/data

e. CAD/Software modelling details

f. Testing of final model if available

g. Any other important aspects you feel should be included

2. Iterative versions of the prototype models with all necessary details

3. Individual Log Book (duly signed by faculty guide)

Exam forms of summer 2017

 B.E Semester- 6 and BE Semester-8 (Regular Student Only)[Penalty 100]

All Students of Following semesters are informed to collect exam forms from student section. Filled up forms with filled exam fee chalan will be checked in student section. Students have to submit Filled forms in student section. 

 

Sr. No.	Branch	Semester	Date
1.	All	B.E Semester- 6 and BE Semester-8 (Regular Student Only)   [Penalty 100]	10-04-2017 to 12-04-2017

                                                                                                              

No exam form will be accepted after the scheduled date of accepting exam forms.

 

 

Note: Students must have to produce chalan of Examination fees paid at time of filling of the examination Form.                                 

Exam forms of Summer-2017

 B.E  Remedial students [Semester 5 to 8]

આ સંસ્થા ખાતે અભ્યાસ કરતા વિદ્યાર્થીઓને જણાવવાનું કે તેમના GTU Remedial Exam form કોલેજ ખાતે આવી ગયેલ છે. જેનીચે દર્શાવેલ તારીખ પ્રમાણે જે તે ડીપાર્ટમેન્ટ માં થી collect કરવાના રહેશે અને તેની ફી આ વખતે online ભરવાની હોવાથી નીચેદર્શાવેલ સમય મર્યાદામાં ભરી દેવાની રહેશે. ફી ભર્યા બાદ તેની પહોચ અને exam form જે તે ડીપાર્ટમેન્ટ માં જમા કરાવવાના રહેશે.

 Ø process to pay online Remedial GTU Examination Fee :

ssgecpatan.blogspot.in >online payment> Click here to pay GTU Remedial Exam Fee >

 

ત્યાર બાદ State Bank Collect માં PRINCIPAL GOVERNMENT ENGINEERING COLLEGE PATAN સિલેક્ટ કર્યા બાદ GTU REMEDIAL EXAM FEES ભરવાની રહેશે.

 

ક્રમ	Branch	તારીખ	વિગત
૧.	BE Semester 5 to 8 Remedial only	10-04-2017 to 12-04-2017	સંલગ્ન ડીપાર્ટમેન્ટ માં થી GTU Remedial Exam form collect કરવા
			Online Fee ભરવી. (Exam Form માં દર્શાવેલ રકમ)
			સંલગ્ન ડીપાર્ટમેન્ટ માં GTU Remedial Exam form ની સાથે online ફી ભર્યાનીપહોચ જમા કરાવવી.