FPE MID SEM SYLLABUS

Syllabus

1.Hydropower Plant: Introduction, Major applications of hydropower plant, Classification of hydropower plant, Essential components of hydropower plant, Advantages and disadvantages of hydropower plant, selection of site for a hydropower plant.

2 Impact of Jet: Introduction, Force exerted on stationary plate held normal and inclined to jet, Force exerted on curved plate, force exerted on moving plate held normal and inclined in direction of moving jet, Force on a plate when vane is moving in direction of jet, jet striking on curved vane tangentially at one tip and leaving at other end, jet propulsion in ships.

 3 Hydraulic Turbines: Introduction, Classification of turbines, Impulse and reaction turbines, construction, working and performance of Pelton, Francis and Kaplan Turbines, Draft tube, Governing of hydraulic turbines, Cavitation.

 4 Centrifugal Pumps: Pump classification and selection criterion, Centrifugal pumps, Velocity vector diagrams, Pump losses and efficiencies, Net positive suction head, Pressure rise in impeller, Characteristic curves of centrifugal pumps, priming, maximum suction limit - minimum starting speed to deliver the discharge, Multistage pumps, cavitation, pump selection.

5.Reciprocating Compressors: Construction and working, Multistage conditions for minimum work, Inter cooling, Efficiency and control of air compressors.

Notice
Mid semester examination will be of 30 marks. These 30 marks will be converted in to 20 marks and remaining 10 marks will be given for attendance and assignments..

FPE ASSIGNMENT 2018

https://drive.google.com/file/d/0BxcIZgro7Dh8WXRzYjJyWFRPQ2c/view?usp=sharing

PPE MIDSEM SYLLABUS

Syllabus

1.Thermal Power Plant
2.High Pressure Boilers
3.Coal and Ash Handling Systems
4.Steam Nozzles
5.Steam turbine
6.Gas turbine
7.Economics of Power Generation

Notice

Mid semester examination will be of 30 marks. These 30 marks will be converted in to 20 marks and remaining 10 marks will be given for attendance and assignments.Students who will have less than 50% attendance will not get marks for attendance and assignments.At the end of midsem exam marks out of 20 will be displayed and total marks out of 30 will be displayed at the end of semester.

NOTICE

3RD SEM MECHANICAL ENGINEERING 

KINEMATICS OF MACHINES (2131906)

MID EXAM SYLLABUS

Reimbursement Fees to students due to change of Result in Rechecking/Reassessmenet 

Following Students are inform to collect reimbursement fee related to  change of Result in Rechecking/Reassessmnet from Account section (Mr. P. N. Pancholi) as soon as possible.

150220119076	PATEL SAHIL JITENDRAKUMAR	7	9512098192	Mechanical
150220119125	ZALA RAVIRAJSINH ANUPSINH	7	9725224594	Mechanical
150220119074	PATEL RISHI ANILBHAI	7	7621853911	Mechanical
150220119058	PATEL DHRUV PRAVINBHAI	7	9723547284	Mechanical
150220119066	P ATEL KRUPESH DINESHBHAI	7	8153878253	Mechanical
150220119099	PRAJAPATI SAVAN BABUBHAI	7	8511976493	Mechanical
160220119120	VASAVA ARCHIT DASUBHAI	5	9512683393	Mechanical
150220119115	THAKKAR JAYMIN   HASMUKHLAL	7	8128042545	Mechanical

Question Bank_CAM (2171903) for mid sem Sep 2018

Question Bank_CAM

Notice

Sem: 5th Sem Mechanical Engineering

Subject: Theory of Machines (2151902)

Mid Sem Syllabus

Question Bank_Mid Sem Exam

Question bank of Engg. Thermodynamics for mid sem exam Sept-2018

Question Bank_ET

Assignment_NC-CNC Machines

CAM Assignment

Mid Exam Schedule_Sep-2018

Government Engineering college, Patan       

                                                                                                                                    Date: 20/08/2018

G.T.U.

PROGRAMME FOR MID SEMESTER EXAMINATION – SEPTEMBER-2018

B.E.SEM – III,V & VII - Mechanical Engineering

Sr. No.	Date & Day	III-Mechanical	V-Mechanical	VII-Mechanical
		11:00 am to 12:00 pm	01:00 pm to 02:00 pm	03:00 pm to 04:00 pm
1	05/09/2018 Wednesday	2130002 ADVANCED ENGINEERING MATHEMATICS	2150003 DISASTER MANAGEMENT (INSTITUTE ELECTIVE)	2171901 OPERATION RESEARCH
2	06/09/2018 Thursday	2130003 MECHANICS OF SOLIDS	2151902 THEORY OF MACHINES	2171903 COMPUTER AIDED MANUFACTURING
3	07/09/2018 Friday	2131903 MANUFACTURING PROCESS - I	2151908 CONTROL ENGINEERING	2171909 MACHINE DESIGN
4	10/09/2018 Monday	2131904 MATERIAL SCIENCE AND METALLURGY	2151903 FLUID POWER ENGINEERING	2171910 POWER PLANT ENGINEERING
5	11/09/2018 Tuesday	2131905 ENGINEERING THERMODYNAMICS	2151909 HEAT TRANSFER	2171912 OIL HYDRAULICS AND PNEUMATIC
6	12/09/2018 Wednesday	2131906 KINEMATICS OF MACHINES	2151907 DESIGN OF MACHINE ELEMENTS

ટેબલેટ યોજના (પ્રથમ વર્ષ ના વિદ્યાર્થીઓ માટે)

ધોરણ ૧૨ પછીના સ્નાતક અભ્યાસક્રમોમાં પ્રવેશ મેળવતા વિદ્યાર્થીઓના શૈક્ષણિક હિત માટે અને તેમના અભ્યાસ ની ગુણવત્તા માં નોધપાત્ર વધારો થાય તથા તેમના શિક્ષણમાં મૂલ્યવર્ધન કરવા માટે ઉપયોગી સવલત તરીકે ટેબલેટ  રૂપિયા ૧૦૦૦  ના ટોકન દરે ઉપલબ્ધ કરાવવાની “ટેબલેટ યોજના” નો લાભ લેવા માટે નીચે જણાવેલ ડીપાર્ટમેન્ટલ coordinator  નો સંપર્ક કરવો.

Sr. No.	Branch	Name of Faculty	Contact place
1	CIVIL ENGINEERING	Prof. M.I.Balya	Civil Dept. L-911
2	ELECTRICAL ENGINEERING	Mr. Ankit Darji	Electrical Dept. L-801
3	ELECTRONICS & COMMUNICATION ENGINEERING	Prof.S.A.Pankhaniya            2.      Prof. R.A.Chaudhary	E& C Dept. L-203 E& C Dept. L-211
4	MECHANICAL ENGINEERING	Prof. G.S.Patel Prof.R.A.Oza	Mechanical Dept. L-401 Mechanical Dept. Room No:413
5	COMPUTER SCIENCE & ENGINEERING	Prof. H.K.Ghevariya Prof. N. J. Mistry	CSE Dept.L-303 CSE Dept.L-311

Not Register Student IN 100 ACTIVITY POINTS Following students are inform to register their detail in 100 Activity Point Portal otherwise they will not eligible to get degree certificate.
Sr. No.	Course	College	enrollment	student name
1	BE	022	150220119014	CHAUDHARI VIVEKKUMAR ASHOKBHAI
2	BE	022	150220119015	CHAUDHARY BHAVESHKUMAR DASHRATHBHAI
3	BE	022	150220119108	RISHAV KUMAR
4	BE	022	150220119110	SHROFF NIKETUKUMAR BABUBHAI
5	BE	022	150220119116	THAKOR ANANDKUMAR VALJIJI
6	BE	022	160220119015	DAVE ABHISHEK PREMSHANKAR

ટેબલેટ માટે જરૂરી સુચના

આથી પ્રથમ વર્ષ મા અભ્યાસ કરતા તમામ વિદ્યાર્થીઓ ને જણાવાનાનું કે જેમને ટેબલેટ લેવાની ઈચ્છા હોય તો તેઓએ ૧૦૦૦/- ફી કોલેજ ખાતે ઓનલાઈન ભરી આપેલ ફોર્મ સાથે ડીપાર્ટમેન્ટ માં સત્વરે જમા કરાવવું. ફેસ ૪ માટે ફોર્મ સ્વીકારવા ની છેલ્લી તારીખ ૪/૧૨/૨૦૧૮ છે.

Online Form

Offline Form

આ બંન્ને ફોર્મ ભરવા જરૂરી છે.

                    

Notice

                BE 3^rd  Sem  Mechanical Engineering students are here by informed that  submit this assignment of  Material science and Materials on or before Date of submission. this assignment is also considered as a part of term work .in this assignment already last five year GTU exam paper’s question is covered so it is beneficially to you in upcoming MID semester and final GTU exam.

Sr.No	Questions.
1	State the importance of study of “Material Science” and briefly explain engineering requirement of materials.
2	Using Gibb’s phase rule, explain unary phase diagram with the help of sketch.
3	Explain and differentiate Edge dislocation and Screw dislocation with neat sketch.
4	What is cooling curve? Explain and differentiate time temperature cooling curve of an alloy of eutectic composition and pure metal.
5	Write a short note on: “Iron-iron carbide equilibrium diagram”.
6	With the aid of an iron- iron carbide equilibrium diagram show and explain eutectic, peretectic and eutectoid transformation. Also mention the significance of these transformations.
7	State composition, specific properties and applications of Grey Cast Iron.
8	What is phase diagram? Explain Lever rule.
9	Explain the steps to obtain the TTT-diagram for eutectoid steel and show on it the cooling curve representing annealing and hardening process
10	What are the purpose of Alloying ? Give effects of nickel as an alloying element
11	Describe and compare Austempering and Martempering.
12	Enlist the properties of pure aluminum and mention the composition, properties and application of any one aluminum alloy.
13	What is Powder Metallurgy? Explain the process of Powder Metallurgy
14	What do you mean by Non-destructive testing? Differentiate destructive and non-destructive testing by stating benefits and limitations.
15	Give specific applications of powder metallurgy parts also describe merits and  de-merits of powder metallurgy process.
16	What are the engineering requirements of materials? Explain in detail.
17	Explain Structure Property and Performance relationships with a suitable example
18	What are the various levels of structure? Explain in detail.
19	What is strain hardening ? Explain how the effect of strain hardening can be eliminated by recrystallization.
20	What is plain carbon steel? Also explain all type of plain carbon steel with the composition and specific application.
21	What is plain carbon steel? Also explain all type of plain carbon steel with the composition and specific application
22	Draw and label TTT diagram for eutectoid steel and show annealing and normalizing in it. Explain the critical cooling rate with the help of TTT diagram.
23	Explain the requirements of metal powders used in powder metallurgy. Also explain various methods of powder production.
24	Differentiate between Annealing process and Normalizing process.
25	Define Heat treatment of metals. Explain with neat sketch TTT diagram for heat treatment of steel.
26	What do you mean by allotropy of metal? Discuss allotropy of Iron.
27	Differentiate between white cast iron and grey cast iron.
28	Compare Destructive test with Non Destructive test
29	What is nondestructive test? List various nondestructive tests. Explain advantages and Disadvantages of non-destructive tests.
30	Explain Dye penetrant testing.
31.	Explain the method Ultrasonic Testing with neat sketch. And also explain its advantages and limitations
32.	Draw the microstructure of white cast iron and enlist its properties.
33.	Justify the need of Heat treatment processes for metals. Explain with neat sketch TTT diagram for heat treatment of steel
34.	Completely describe the “Sintering Process”.
35.	Evaluate – Annealing is never a final heat treatment process for hypereutectoid steel.
36.	Define tool steel. Explain any five tool steels by describing their properties.
37.	Completely describe the “sintering” process with sketch. Mention the condition for which “pre-sintering” is required
38.	Describe the important constituents, properties and application of following alloys: (1) Monel (2) Invar (3) Nichrome (4) Babbitt metal
39.	Explain in detail, the ultrasonic testing method with its benefits and limitations
40.	Explain the principle of Radiography testing. With its use in metal testing.
41.	Explain Flame hardening
42.	Determine atomic packing factor for FCC crystal structure with sketch.
43.	What is the solid solution? Explain types of solid solution with sketch.
44.	Explain Eddy current testing method with neat sketch. Also explain limitations and applications
45.	Define the following material properties: i) Ductility ,ii) Creep and iii) Hardness
46.	Differentiate between Polymers and Composite materials
47.	Explain the ‘Lever rule’ based on the phase diagram of binary alloy.
48.	Explain Induction hardening
49.	Explain Jominy Hardenability Test with a neat sketch
50.	Explain the composition, properties and applications of Muntz metal